top of page

Five cylinder mechanical injection pumps built with bigger elements for OM602, OM662 and OM605 super-turbo builds.


Choose from the following:

6 mm elements for mild builds with internal ALDA (up to 250 hp)

7.5 mm Dieselmeken elements with external ALDA (street/daily/off-road)

8.0 mm Dieselmeken elements with external ALDA (race/drift)


Your pump will be built in house. First it's dissasmbled and cleaned ultrasonically. Then reassembled with bigger performance elements. Next, it is mounted on our test bench where it is phased and calibrated. We then test run every pump on an engine before shipping to be sure everything is right. We sometimes can ship within a few days, but it can be a couple weeks depending on our queue.


We inlclude the pump to block gasket. A lift pump will not be included, as you probably already have one on your original pump. If you need one, you can buy one HERE.


You are not required to send us a core pump, as this is an outright sale. But if possible, once you receive your built pump, please send us a core using the provided shipping label that will be in the label holder on the box, and same packaging. Once we receive your core(s), you'll be refunded the following:

$350 for OM603 and 1995 OM606

$250 for OM602

$300 for OM617 M

$100 for OM606 and OM605 EDC

$100 for OM617 MW


At checkout, please note how many CC's of fuel you want your pump set to.


If your engine had an EDC pump originally, you'll need a smaller return banjo bolt.

Performance 5 Cylinder (OM605 & OM602) Mechanical Injection Pump (Dieselmeken)

    bottom of page